Interior Dimensions

[apex96]

A lot has been talked about regarding exterior dimensions and Scout has provided those numbers... But what about the inside...

With pre-production bodies beginning to be created (for fitment confirmation/validation), how soon can we expect until interior dimensions are provided?

I'm very interested in cargo volume for the Traveler. I'd be interested in knowing cargo volume with seats up and seats down (not including under-seat storage or frunk storage) and volumes for the frunk and under seat storage compartments.

Also would be interested to know if a 33" spare is fitted under the body, does that take away from any under seat storage capacity?

The vehicles cargo volume will be the determining factor on if I keep my reservation until the end. I carry three dogs and do some long hall road trips and you'd be surprised at the amount of dog gear one may need to bring for long trips... I run a hitch rack now for totes and always looking at ways to pack lighter and less every year but three dogs (50-120 pounds) with maybe a fourth soon, still take up a lot of room!

Thankfully no kids... Yet!

@Jamie@ScoutMotors when can we expect some solid baseline numbers for the interior?

 

[J Alynn]

A lot has been talked about regarding exterior dimensions and Scout has provided those numbers... But what about the inside...

With pre-production bodies beginning to be created (for fitment confirmation/validation), how soon can we expect until interior dimensions are provided?
Suspect we will be waiting for that info for a while but hopefully you can hang on until they announce it. If you think about majority of basic 3-rows-Toyota Highlander, honda pilot, not Suburban, that will give you very good idea and traveler will be even a bit wider. That’s quite a special carry capacity so I can see why you want to know. What do you haul them in currently?
I'm very interested in cargo volume for the Traveler. I'd be interested in knowing cargo volume with seats up and seats down (not including under-seat storage or frunk storage) and volumes for the frunk and under seat storage compartments.

Also would be interested to know if a 33" spare is fitted under the body, does that take away from any under seat storage capacity?

The vehicles cargo volume will be the determining factor on if I keep my reservation until the end. I carry three dogs and do some long hall road trips and you'd be surprised at the amount of dog gear one may need to bring for long trips... I run a hitch rack now for totes and always looking at ways to pack lighter and less every year but three dogs (50-120 pounds) with maybe a fourth soon, still take up a lot of room!

Thankfully no kids... Yet!

@Jamie@ScoutMotors when can we expect some solid baseline numbers for the interior?

 

[J Alynn]

Is it the excursion in your photo? Traveler will be smaller than that presuming the older excursions are similar in size to your model

 

[apex96]

Is it the excursion in your photo? Traveler will be smaller than that presuming the older excursions are similar in size to your model

Not an excursion, the smaller version, expedition. Right now the Rivian R1S has similar space to the standard size expedition (it does lack some interior space) but also has additional storage in the frunk and under floor that the expedition lacks so it’s total cargo volume is almost exact.

Interior space is important but so is the additional space where I can stow bags and loose items that will free up interior space in the cabin.

 

[Mousehunter]

I don't think final interior dimensions have been released. There are a few posts here and there where people have taken measurements at viewings. We can also get an idea of possible interior dimensions from calculation what is possible from the exterior dimensions. My wag is that at least for the Terra - it would probably have similar dimensions of a 1/2 ton truck (Scout has said it will be full sized). My guesses are weaker when it comes to the SUV. I think 1/2 ton framed SUV's have grown longer overhangs over time to cram in a 3rd row seat (3rd row seats sell, and companies are always tempted to cut costs and not have 2 different lines). Scout is going with minimal overhangs and not offering 3rd row seating yet. I am hoping the rear cargo area is deep enough - whatever that means.

 

[apex96]

I don't think final interior dimensions have been released. There are a few posts here and there where people have taken measurements at viewings. We can also get an idea of possible interior dimensions from calculation what is possible from the exterior dimensions.

The final interior dimensions haven't been released publicly, at least that I can find.

I've seen Cyure's iPhone dimensions on here but with these being hand built prototypes I don't want to put to much stock into those measurements.

I can stand to lose some interior volume if I can gain storage in a frunk or under the floor. In the expedition, we load a lot of gear behind the first row and really the dogs get the space that the third row occupies with the seats folded. The gear loaded behind the front row could find it's way into a frunk thus allowing for a shorter overall vehicle length.

 

[cyure]

The final interior dimensions haven't been released publicly, at least that I can find.

I've seen Cyure's iPhone dimensions on here but with these being hand built prototypes I don't want to put to much stock into those measurements.

I can stand to lose some interior volume if I can gain storage in a frunk or under the floor. In the expedition, we load a lot of gear behind the first row and really the dogs get the space that the third row occupies with the seats folded. The gear loaded behind the front row could find it's way into a frunk thus allowing for a shorter overall vehicle length.

I haven’t seen any posted interior dimensions either.

And yes it was difficult to get the phone to pick up a place to start and end when I was trying to measure the interior because of the dark interior.

I will see what I can do in SC with the phone measuring tool again. If there’s anything specific you all want let me know. It won’t be 20 degrees like in Chicago so easier to measure things since no gloves necessary.

 

[apex96]

I haven’t seen any posted interior dimensions either.

And yes it was difficult to get the phone to pick up a place to start and end when I was trying to measure the interior because of the dark interior.

I will see what I can do in SC with the phone measuring tool again. If there’s anything specific you all want let me know. It won’t be 20 degrees like in Chicago so easier to measure things since no gloves necessary.

If they'll allow a tape measure grab length width and height behind the second row and then the length from the rear of the center console to the back of the second row seat. This will give approximates of the prototypes at least. Hope will be that the final design is within 10 cubic feet of the prototypes.

Add in frunk length width and height dimensions too lol

 

[cyure]

If they'll allow a tape measure grab length width and height behind the second row and then the length from the rear of the center console to the back of the second row seat. This will give approximates of the prototypes at least. Hope will be that the final design is within 10 cubic feet of the prototypes.

Add in frunk length width and height dimensions too lol

I’ll do my best, but I have a feeling this is going to be like Nats where they will be behind a velvet rope, as opposed to Chicago where she wasn’t.

 

[Jamie@ScoutMotors]

A lot has been talked about regarding exterior dimensions and Scout has provided those numbers... But what about the inside...

With pre-production bodies beginning to be created (for fitment confirmation/validation), how soon can we expect until interior dimensions are provided?

I'm very interested in cargo volume for the Traveler. I'd be interested in knowing cargo volume with seats up and seats down (not including under-seat storage or frunk storage) and volumes for the frunk and under seat storage compartments.

Also would be interested to know if a 33" spare is fitted under the body, does that take away from any under seat storage capacity?

The vehicles cargo volume will be the determining factor on if I keep my reservation until the end. I carry three dogs and do some long hall road trips and you'd be surprised at the amount of dog gear one may need to bring for long trips... I run a hitch rack now for totes and always looking at ways to pack lighter and less every year but three dogs (50-120 pounds) with maybe a fourth soon, still take up a lot of room!

Thankfully no kids... Yet!

@Jamie@ScoutMotors when can we expect some solid baseline numbers for the interior?

We know everyone is anxious for final interior dimensions and I will follow up with teams to see if we have anything we can share. The hard part on areas like the rear hatch storage or frunk, is that final mechanical equipment and sheetmetal had to be sorted out first. Once everything has its place, they can then mold the plastics to the remaining space available. So giving early estimates would potentially spread misinformation or leave people disappointed.

 

[cyure]

We know everyone is anxious for final interior dimensions and I will follow up with teams to see if we have anything we can share. The hard part on areas like the rear hatch storage or frunk, is that final mechanical equipment and sheetmetal had to be sorted out first. Once everything has its place, they can then mold the plastics to the remaining space available. So giving early estimates would potentially spread misinformation or leave people disappointed.

Thanks Jamie!

 

[apex96]

We know everyone is anxious for final interior dimensions and I will follow up with teams to see if we have anything we can share. The hard part on areas like the rear hatch storage or frunk, is that final mechanical equipment and sheetmetal had to be sorted out first. Once everything has its place, they can then mold the plastics to the remaining space available. So giving early estimates would potentially spread misinformation or leave people disappointed.

Understand, not looking for early estimates, just know that there's likely a roadmap in place on when certain things are due for finalization and the interior is likely one of those things. Is it possible to give us a date "window" on when that information may finally be known?

I'm fine with waiting but with everything in life, the sooner I have information in hand the sooner I can determine what I do with my current rig (keep, trade, sell, etc.).

 

[THil08]

I haven’t seen any posted interior dimensions either.

And yes it was difficult to get the phone to pick up a place to start and end when I was trying to measure the interior because of the dark interior.

I will see what I can do in SC with the phone measuring tool again. If there’s anything specific you all want let me know. It won’t be 20 degrees like in Chicago so easier to measure things since no gloves necessary.

Bring a real tape measure this time. And a folding ruler

 

[J Alynn]

Bring a real tape measure this time. And a folding ruler

I’m thinking a pale colored morph suit with scaled dimensioning printed all over it so when she sprawls over the hood or climbs into the trunk we can see the size. @cyure you did say just let us know what we’d like to see You can walk around stretch your arms and Boom, instant measurements! Problem solved